The Powersoft X4 is a 4-Channel Touring Amplifier with DSP integration, and 4 x 5200W at 2 Ohm, or 4 x 3000W at 4 Ohm. The X-Series in particular has been sophisticatedly designed to deliver the output voltage required by the latest generation of high-performance loudspeakers; raising the bar in amplifier design and functionality. Equally useful for most subwoofers, as well as high-power fullrange systems, and suitable for any configuration and purpose. Ultimately flexible and safe, the Powersoft X4 permits worldwide AC acceptance and direct connection to any regional power line configuration.

Powersoft’s X4 provides four fully processable channels and selectable inputs from analog sources, as well as digital AES3 and two redundant Dante™* streams. Channel mixing and routing can be easily performed thanks to the integrated revolutionary low latency DSP, providing the highest degree of freedom in sound shaping and speaker management. Full support to 100 Mbps and Gigabit Ethernet makes it easy to integrate this product into any existing infrastructure.

Both versions of the X Series: the X8 (8-channel) and X4 (4-channel) come standard with Ethernet for extensive amplifier control, full DSP functionality, routing, matrix, and worldwide compatible three-phase power supply. The X Series natively supports AES3 with redundant Brooklyn II based Dante – providing up to 4 different selectable input sources per channel. Completely integrated into ArmoníaPlus™, the Powersoft X4L interface is also available for use in both smartphones and tablets, ensuring a new experience in power management.

Product Features

• Remote Management
  Control and monitoring through ArmoníaPlus​. Dedicated Web App.
• Remote Monitoring
  Hardware monitor available for fast local diagnostics​. Real-time load impedance measurement/display for each channel​. Real-time output power measurements/display for each channel​. Mains voltage and current. measurements/display.
• Protections
  Fully protected circuit design with:​ Innovative failure protection. Real-time measurement and processing of output signal. Protection against potentially harmful signals: DC, VHF, and clipping.
• Power Supply
  Suitable for Single-Phase, Two-Phase or Three-Phase operation from 85 VAC up to 440 VAC, with automatic switching and balancing​. Three-phase load balancing directly managed by the unit without the need for complex load assignments in the system design​. Power Factor Correction PFC for low power consumption and compatibility with a wide range of voltages​. Power limiters that eliminate the need for expensive power sequencers.
• General
  Flexible routing/mixing provided by the internal 4×4 Input/Output matrix, allows the user to mix and route analog and digital I/O. ​4 Input channels with physical analog and digital AES3 connectors and optional 16-in/8-out redundant Dante™ connection provides maximum flexibility.​ Improved reliability thanks to the customizable input backup strategy that automatically switches input source in case of a signal failure. ​Complete user interface integrated into ArmoníaPlus. ​WiFi remote monitoring through mobile device. Non-boolean channel routing. Signal grouping for speaker routing.
• Digital Signal Processing
  TI C6000 DSP platform architecture​. AD/DA converter: dual 24bit @48 kHz Tandem® architecture, 127 dB dynamic range, per channel​. Input/Output independent equalizers per channel providing Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass​. Crossovers: Linear phase (FIR), Hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)​. Input delay up to 2s and output delay up to 100ms for time alignment per channel​. Active DampingControl™ for cable compensation​. Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter.

Data Sheet